Mas Fuster workshop of Xavier Mas

Mas Fuster rebuilds the Catalan farmhouse table and the rush chair in solid oak

At Mas Fuster, the Barcelona workshop of cabinetmaker Xavier Mas, design starts with listening closely to the wood and respecting the tradition that came before it. For the first edition of OFICI, the Traditional Crafts Fair organised by the Consorci de Comerç, Artesania i Moda (CCAM) of the Generalitat de Catalunya, Mas presented a proposal built around vernacular furniture and turned pieces.

The fair took place at the Castle of Cardona from 6 to 8 November 2026. Its organisers conceived it as a showcase for the relevance of handwork, the mastery of trades and the sustainability of materials. In that setting, Mas Fuster offered a contemporary reading of historic pieces, rewritten with the rigour of author cabinetmaking.

Mas Fuster workshop of Xavier Mas
Xavier Mas

Quercus, after the Catalan farmhouse table

To begin with, the Quercus table draws on the traditional table of the Catalan masies, known for its solidity, its austere function and its strong presence in a room. Its top consists of oak boards that a lower crosspiece holds together with a sliding dovetail, called ala de mosca. At each end, faixes close the boards. Traditionally, these end caps keep the wood stable as humidity changes.

Following the philosophy of the workshop, Mas builds the whole table with traditional joinery. First, he assembles the base with glued half-lap and mortise-and-tenon joints. Then four tapered wooden pegs, fitted by hand, fix the top to the frame. In fact, the table has not a single metal screw, so the wood can breathe and move over time.

Quercus table
Quercus table
Quercus table, oak boards
Oak boards of the Quercus table
Quercus table, base detail
Detail of the base and pegs

Carmen, a new rush chair

For centuries, the rush chair was the everyday seat of the Mediterranean. Traditionally, makers used soft, humble woods such as pine or poplar. Now the Carmen series, a chair, an armchair and a stool, lifts this vernacular reference into a piece of contemporary design.

Instead of poplar, Mas Fuster uses solid oak (Quercus), which gives the seat more density, durability and texture. The legs and frames also leave behind the rough traditional turning for straight, clean lines, with especially slender rails. Moreover, the Carmen chair adds a curved backrest woven by hand on both sides with natural rush. Consequently, that detail makes it cleaner to look at and noticeably more comfortable. Finally, an extra-matt varnish protects the oak frame and keeps the warm feel of the wood.

Carmen chair, woven rush backrest
Woven rush backrest of the Carmen chair
Carmen chair, front view
Front view of the Carmen chair
Carmen chair
Carmen chair

Poplar, turned into sculpture

To complete the proposal for OFICI, Mas Fuster added a series of turned bowls that speak directly to the history of traditional furniture. Poplar, the humble wood that once formed the frames of rush chairs, goes on the lathe here to show its more expressive side.

Compared with oak, poplar turns more gently and holds its shape better as it dries. Its real value, however, is its unusual texture, a softness close to clay. For this reason, in these pieces Mas keeps the natural bark, the voids and the hollows of the trunk, so each bowl is organic and cannot be repeated.

Turned poplar bowls
Turned poplar bowls
Mas Fuster workshop of Xavier Mas
Poplar bowls in the workshop
Poplar bowls in the workshop
A poplar bowl that keeps the voids of the trunk
A poplar bowl that keeps the voids of the trunk
Mas Fuster workshop of Xavier Mas

Listening to the tree

Earlier in 2026, Mas Fuster also turned a series of bowls from recovered trees of the genus Quercus: holm oak, oak and cork oak. Mas works the wood green, turning raw blocks of up to 60 kilograms in long sessions of eight to twelve hours. As a result, each piece keeps changing for months as it dries, and the air and the tensions in the wood decide its final shape.

He also keeps marks that many would call flaws, such as the galleries bored by the larva of the great capricorn beetle (Cerambyx cerdo). For finishes, he avoids synthetic products. Instead, he ebonises the pieces through the natural reaction between iron and the tannins in the wood, or with fire, and then seals them with natural oils.

Mas Fuster workshop of Xavier Mas
Mas Fuster workshop of Xavier Mas
Mas Fuster workshop of Xavier Mas
Mas Fuster workshop of Xavier Mas
Mas Fuster workshop of Xavier Mas
Mas Fuster workshop of Xavier Mas
Roure de Can Pou bowl
Roure de Can Pou bowl
Omdeparets III bowl
Omdeparets III bowl
Roure de Mas Pujols I
Roure de Mas Pujols I
Surera de Can Pou I and II
Surera de Can Pou I and II

Mas Fuster, from forest to object

In short, both the furniture and the turned pieces come from one consistent craft practice. Xavier Mas takes part in every step: he chooses fallen or recovered trees in the mountains of Catalonia, saws them, leaves them to dry naturally for several years and finishes them at the bench or on the lathe.

Choosing walnut trees in Pallars Sobirà
Choosing walnut trees in Pallars Sobirà
Beech, mountain elm and oak, from left to right
Beech, mountain elm and oak, from left to right
Siberian elm from urban pruning in Barcelona
Siberian elm from urban pruning in Barcelona
Nakashima console in American walnut from La Fageda d’en Jordà
Nakashima console in American walnut from La Fageda d’en Jordà
The Nakashima console
The Nakashima console
Komorebi table in Quercus robur oak from the Garrotxa and France
Komorebi table in Quercus robur oak from the Garrotxa and France
Nakashima table in Quercus robur oak from France
Nakashima table in Quercus robur oak from France
Yutori table
Yutori table
Hayashi table in oak, with Daniel Colmenares
Hayashi table in oak, with Daniel Colmenares
Table for Tenerife
Table for Tenerife

At OFICI, inside the Castle of Cardona, that work showed how the woods of the region and the everyday forms of memory can be updated for contemporary homes and grow old with them. For another take on furniture and Catalan making, see our Catalonia stories.

Project Credits

Designer and maker: Xavier Mas, Mas Fuster / @mas_fuster
Pieces: Quercus table, Carmen series (chair, armchair, stool), turned poplar bowls
Materials: Oak (Quercus), poplar, natural rush
Event: OFICI, Traditional Crafts Fair of Catalonia
Organiser: Consorci de Comerç, Artesania i Moda (CCAM), Generalitat de Catalunya
Venue: Castell de Cardona, Barcelona
Dates: 6 to 8 November 2026

Stay connected with DesignArcus

A curated selection of architecture, design, art and ideas, delivered to your inbox.

We don’t spam! Read our privacy policy for more info.

Leave a reply

Loading Next Post...
Search
Loading

Signing-in 3 seconds...

Signing-up 3 seconds...